LED Cone Ring Light 6 Pack

P/N: AP-61

The Stop-Lite LED Cone Ring Light 6-Pack is a professional-grade, powerful traffic safety lighting system that includes six synchronized ring lights and a lightweight charging station carry case.

Use any number of lights depending on your needs, and even switch them to independent mode if you don't want them to automatically sync up!

The ring lights will automatically turn on when removed from the case, automatically sync together, and automatically shut off when placed back in the case.

Each ring light fits standard traffic cones and can be mounted to vehicles and other metal surfaces using built-in magnets. With five selectable lighting modes, long-lasting rechargeable lithium-ion batteries, and simple operation, the Stop-Lite 6-Pack is ideal for traffic control, construction zones, emergency response, roadside safety, parking management, and events.

Cone Ring Light 6-Pack

Lightweight carrying case

Automatic on/off

Independent mode or auto sync

Snap-in magnetic ring storage

Dual-sided case w/ reflective strips

Rings have 360-degree visibility

x2 reflective strips on each ring

x4 light diffusers on each ring

Waterproof IP65 & durable

Built-in magnets for metal mounting
Cascading Flash

Unified Flash (All)

Quick Cascade Flash

Double Cascading Flash

Breathing Flash
Rechargeable Li-Ion Battery

AC/DC charging port

Charge Time: 6-7 hours

Capacity: 3.7v 2200mAh

Up to 50 hours of use with each charge (depends on the lighting function)
How do I operate this set? The rings will automatically turn on when taken out of the case, and will automatically turn off when placed back in the case properly (see below).

Is there a correct way to dock the rings in the case? While there is no specific order to place them in, they must be docked in a way where the metal charging pins align (see instruction sheet).

How do the ring lights charge? All rings charge at the same time while docked in the case (only when the case is plugged in). The lights will glow either red or green to indicate charge levels. If there is no light, the ring was docked incorrectly.

Can I use the lights while the case is charging? No- if the case is plugged in while you take the rings out, they are still in charge mode. You must unplug the case, then remove the ring lights.

Can I use 1or 2 ring lights instead of all 6? Yes!

Do the lights work independently from each other? Yes, they can! When taken out of the carry case, they will automatically sync together and operate as a single system. But if you press & hold the function button on an active light, it will change to independent mode.

How does the syncing order work? The order in which the lights are removed from the case determines their sequence. Lights should be removed about 3 seconds apart to allow system activation.

What if I don’t like the sequence order? Press and hold the power button on any light to turn them all off. Then turn them back on in your desired order (press the power button one time on each).

Can I sync multiple 6-packs of ring lights together? No.

What if I mix rings from different 6-packs in the same case? Any ring light can be placed into any charging case for storage or charging, but they won't sync together.

How can I tell which rings are synched if they get mixed up from different 6-packs? The easiest way to tell is to activate all lights, and then press/hold the power button on any one ring. All synched rings will turn off at the same time.

Cone Ring Light 6-Pack

Key Features

Lighting Modes

Battery Info

Purchase Includes

Warranty

Size

Product FAQs

Instruction Sheet